What tools are required for the installation and disassembly of skeleton oil seals?
1、 The commonly used tool for dismantling skeleton oil seals is the oil seal puller/oil seal remover, which is a one-on-one tool that is the most standard and does not damage the ...
2026-03-31
How to determine if the model and size of the skeleton oil seal match?
1、 First, understand the three key dimensions of the skeleton oil seal model. All oil seals are labeled in this order: inner diameter d x outer diameter D x height H. Unit: mm (mi...
2026-03-31
What are the reasons for oil leakage after installing the skeleton oil seal?
The common causes of oil leakage after the installation of skeleton oil seals are: 1. Installation problems (common). The reverse spring side of the oil seal and the sealing lip are...
2026-03-31
Installation and disassembly methods of skeleton oil seal
1、 Disassembly method: Clean the oil and mud around the oil seal to prevent impurities from falling into the cavity. Common disassembly tools: screwdriver, hook, puller, one-on-on...
2026-03-31
What are the materials of skeleton oil seals? How to choose?
1、 What are the common materials for skeleton oil seals? NBR nitrile rubber is commonly used, cost-effective, and resistant to mineral oil, gasoline, and hydraulic oil. Good tempe...
2026-03-31
Material selection of polyurethane oil seal
Polyurethane oil seal is a sealing component made of this material. Sealing refers to the combination of at least one pair of end faces perpendicular to the axis of rotation, which ...
2026-03-31
